EAGLE
-
EAGLE PREMIER 1988
MASTER CYLINDER MAY HAVE BEEN MISASSEMBLED CAUSING A BLOCKED HYDRAULIC FLUID OUTLET PORT AND RESTRICTED FLUID FLOW.
-
EAGLE 05 BUS 1978
HUB SEPARATION, DUE TO CRACKS BETWEEN THE INNER AND OUTER BEARING OF THE HUB, CAN OCCUR WHICH WILL LEAD TO HUB FAILURE. WHEN FAILURE OCCURS, THE SEPARATED HUB IS RETAINED ON THE AXLE SPINDLE BY THE WHEEL BEARING ADJUSTING NUTS, AND CAN RESULT IN TWO POSSIBLE CONDITIONS: 1) GENERATION OF EXCESSIVE HEAT RESULTING FROM THE BRAKE LINING CONTACTING THE DRUM CAUSING A BLOWN TIRE AND/OR FIRE, AND 2) PROGRESSIVE DAMAGE TO THE HUB WHICH WOULD ALLOW THE SEPARATED HUB WITH THE WHEEL AND TIRE TO BECOME DISENGAGED FROM THE VEHICLE IN AN UNCONTROLLED MANNER.
-
EAGLE 05 BUS 1976
HUB SEPARATION, DUE TO CRACKS BETWEEN THE INNER AND OUTER BEARING OF THE HUB, CAN OCCUR WHICH WILL LEAD TO HUB FAILURE. WHEN FAILURE OCCURS, THE SEPARATED HUB IS RETAINED ON THE AXLE SPINDLE BY THE WHEEL BEARING ADJUSTING NUTS, AND CAN RESULT IN TWO POSSIBLE CONDITIONS: 1) GENERATION OF EXCESSIVE HEAT RESULTING FROM THE BRAKE LINING CONTACTING THE DRUM CAUSING A BLOWN TIRE AND/OR FIRE, AND 2) PROGRESSIVE DAMAGE TO THE HUB WHICH WOULD ALLOW THE SEPARATED HUB WITH THE WHEEL AND TIRE TO BECOME DISENGAGED FROM THE VEHICLE IN AN UNCONTROLLED MANNER.
-
EAGLE 05 BUS 1977
HUB SEPARATION, DUE TO CRACKS BETWEEN THE INNER AND OUTER BEARING OF THE HUB, CAN OCCUR WHICH WILL LEAD TO HUB FAILURE. WHEN FAILURE OCCURS, THE SEPARATED HUB IS RETAINED ON THE AXLE SPINDLE BY THE WHEEL BEARING ADJUSTING NUTS, AND CAN RESULT IN TWO POSSIBLE CONDITIONS: 1) GENERATION OF EXCESSIVE HEAT RESULTING FROM THE BRAKE LINING CONTACTING THE DRUM CAUSING A BLOWN TIRE AND/OR FIRE, AND 2) PROGRESSIVE DAMAGE TO THE HUB WHICH WOULD ALLOW THE SEPARATED HUB WITH THE WHEEL AND TIRE TO BECOME DISENGAGED FROM THE VEHICLE IN AN UNCONTROLLED MANNER.
-
EAGLE 05 BUS 1975
HUB SEPARATION, DUE TO CRACKS BETWEEN THE INNER AND OUTER BEARING OF THE HUB, CAN OCCUR WHICH WILL LEAD TO HUB FAILURE. WHEN FAILURE OCCURS, THE SEPARATED HUB IS RETAINED ON THE AXLE SPINDLE BY THE WHEEL BEARING ADJUSTING NUTS, AND CAN RESULT IN TWO POSSIBLE CONDITIONS: 1) GENERATION OF EXCESSIVE HEAT RESULTING FROM THE BRAKE LINING CONTACTING THE DRUM CAUSING A BLOWN TIRE AND/OR FIRE, AND 2) PROGRESSIVE DAMAGE TO THE HUB WHICH WOULD ALLOW THE SEPARATED HUB WITH THE WHEEL AND TIRE TO BECOME DISENGAGED FROM THE VEHICLE IN AN UNCONTROLLED MANNER.